CCTV ACCESSORIES
Cabling for IP Cameras
PLC-320 [#28076]
PLC technology ensures data transmission from IP cameras through the two power cables of the electrical installation.
All circuits are embeded on camrea stands
PLC with protective case
built-in 12V DC / 2A power supply to feed the IP camera.
Transmission distance from 80 up to 600m depending on the quality of the cables and connections of the electrical installation.
maximum transmission speed 200Mbps. Important Notice: For the system to is needed a signal decoder (PLC-330 or PLC-340) from the NVR side.
Important Notice: PLC Encoder and Decoder must be powered by the same phase of local Electric Network.
Cabling for IP Cameras
POE-120 [#28092]
POE Splitter
POE Standard: IEEE802.3AF
Output voltage: 5VDC / 2A, or 9VDC / 1.5A or 12VDC / 1A
Can be Installed on rack or wall
Cabling for IP Camera
POE-130/24 [#34159]
Balun pair 24V
For Powering IP Cameras via POE
Through UTP Cat 5
Distance 30m
Cabling for IP Camera
POE-150 [#8173]
For Power Supply
IP POE Camera
through UTP Cat 5
Distance 30m
Cabling for IP Cameras
POE-901 [#28091]
Poe Injector Channel
POE Standard: IEEE802.3AF
POE terminals: V- (PIN1,2) V + (PIN3,6)
Power of Built-in power supply: 15.4W
Can be Installed on wall or rack
POE2CH-1000M PoE Splitter
POE2CH-1000M [#46160]
PoE extension, from 1 PoE port to 2 PoE with connected devices at a distance of <100m
PoE Power Input, maximum power of connected devices 30W.
Dimensions: 84x53x22mm
Power Supply for Cameras
PSU-1366 [#9336]
Power Supply 12VDC 6A
6 Outputs, 1A each one.
Supports Battery 12V / 7Ah (Not Included), for Autonomy
Power Supply for Cameras
PSU-2211 [#15576]
Waterproof Power Supply
From AC 230 to 12V DC, 1A
Ideal for Powering an Outdoor CCTV Camera
Power Supply for Cameras
PSU-2222 [#30946]
Brand: HOMELUX
Power Supplpy with Housing
from AC 230 to 12V DC, 2A
Ideal for power supplying an outdoor CCTV camera
Power Supply for Cameras
PSU-2291 [#23301]
Power Supply for 9 Cameras
220V AC Input
12V DC, 10A Output
Power Supply for Cameras
PSU-2295 [#7645]
Power supply for 9 cameras, 220 V AC INPUT, 5A, 9CH, 12V DC OUTPUT, Dimensions: 21 L x 24 H x 5,5 W
Overcharge Protection
SPD-100/LRS01-E100 [#23400]
Protection from Overcharge on Network lines
Input 5V
Voltage Cut-off 40V
Nominal Discharge Current 5KA
Maximum Discharge Current 10KA
Losses: 0.3 DB
RJ45 terminal plug
Overcharge Protection
SPD-120 [#23402]
Protection from Overcharge on Power Supply lines
Input 12V
Response time <=0.5ns. Working Temperature: from -60°C up to +90°C. Voltage Cut-off 18V
Nominal Discharge Current 5KA
Maximum Discharge Current 10KA
Losses: 0.3 DB
Terminal to screws
High Volatge Protection
SPD-12CS [#9243]
High Voltage Protection for signal control lines (eg RS 485),
Maximum signal voltage 5V,
maximum instant unloading current 10KA,
Passing losses: <0.2DB,
Time Response: 1ns
Overcharge Protection
SPD-400 [#23398]
Protection from Overcharge on Video signal lines
Input 5V
Voltage Cut-off 7,8V
Nominal Discharge Current 5KA
Maximum Discharge Current 10KA
Losses: 0.5 DB
Terminal Plug BNC/75Ω
Color Quad
SQC-400 [#7770]
Color Quad, 720x576, 12VDC, 25fps, Full Screen, 4 Videos, PIP, Motion Detection, BNC plugs
Bracket for Camera
TSB-03 [#7330]
Metallic Bracket for Camera. Weight 120gr Height 13cm. Introduced for MDC-480 / MDC-481
Bracket for Cameras, Beige
TSB-20 /I [#5926]
Bracket for Camera, Aluminum, Adjustable, Beige, 10Kgr, Length: 30cm
Stand for Camera with Horizontial Movement
TSB-25 [#26151]
Stand for Camera, Plastic, horizontal movement is controlled via protocol PELCOD (2400 Baud Rate)
White
Maximum Load: 2kgr
Length: 20cm
Power Supply for Cameras 1A
UHT-13/PS [#25912]
Power Supply unit 12VDC / 1A,
Suitable for wireless microphone UHF-13
Dimensions: 74 x 29 x 48mm
Video Converter
VDB-101C/PAIR [#31353]
Balun, BNC cable (male) to pillar connector
300m with passive receiver, 1000m with active receiver
DC-10MHz, 60dB Crosstalk
Video Corverter
VDB-105AHD/CHD/PAIR [#17014]
Balun Pair, Video Transmission Up to 300m,
Bandwidth 8MHz,
Disposal of Interference> 60dB,
BNC-Screws Terminals
Video Converter
VDB-106A/PAIR [#31356]
Balun that does not need any tools for installation,
Video Transmission up to 330m with passive receiver,
Video Transmission up to 1500m with active receiver,
8MHZ bandwidth, interference rejection>60dB.
Video Converter
VDB-106C/HD-217B [#31357]
Balun that does not need any tools for installation with a cable in the BNC plug
Video transmission up to 330m with passive receiver,
Video transmission up to 1500m with active receiver
Bandwidth 8MHZ, interference rejection> 60db.
Video Converter
VDB-120 [#31324]
Active Video Balun, video receiving via UTP Cat5, compatible with all passive Balun, it is installed by the DVR side (receiver), 12V DC power supply is needed
Video Converter
VDB-201A [#5956]
Video Balun,
Video Transmition through UTP Cat5
Screws to BNC,
Distance 400-600m
Video Converter
VDB-202C [#5987]
Video Balun,
Video Transmition through UTP Cat5
Screws to BNC,
Distance 400-600m . In Blister
Video Converter
VDB-202E/PCS [#5965]
Video Balun,
Video Transmition through UTP Cat5
Screws to BNC,
Distance 400-600m . In Blister
Video Balun
VDB-205A [#8249]
Video Balun,
Transmission Distance 200m (Color Image) 300 meters (black and white image).
Login: 75 ohm
Exit 100 ohm, With filter.
Video Converter
VDB-206B/206C [#12552]
Set of passive balun, can transmit Video, Audio and Low Voltage Power Supply, built-in hypertension protection,
Zone Range 8MHz, interference rejection> 60dB
Video Converter
VDB-207 [#31323]
Video Balun, Video transmission via UTP CAT5, Transmission distance: 400m for color signal, 600m black & white signal.
Video Converter
VDB-208 [#31321]
Video Balun, video transmission via UTP Cat5,
Transmission distance: 600m for black & white signal, 400m for Color signal
Video Converter
VDB-209 [#31322]
Video Balun, Video transmission via UTP Cat5,
Transmission distance: 330m for Passive Receiver, 1500m for Active Receiver
Video Balun
VDB-212 [#31320]
Video Balun, video transmission via UTP, BNC with cable and pillar connector (for UTP).
VGA Splitter
VSP-20 [#8728]
VGA Splitter. 1 VGA input to 2 VGA outputs. Supported Resolutions up to 1600 x 1280. Power supply 9VDV / 500mA. Can Support cable lengths up to 50 meters.
HDMI MATRIX 4x4 (4K@30Hz)
CVT-314 [#47733]
HDMI Matrix 4 x 4 , 4 inputs, 4 outputs, supports HDCP 1.4, output 1 has both analog headphone audio output and optical digital audio output. Resolution up to 4K/30Hz, Supply voltage: 12VDC / 1A (power supply included).
Dimensions: 276x143x26 (mm
Digital Optical to Coaxial (ToSHLINK) Converter
CVT-540 [#38163]
Digital Audio Optical Signal Converter, from optical to coaxial
HDMI Selector
CVT-551 [#38172]
HDMI selector with 3 Inputs and 1 output, features an IR remote control and supports signal up to 4K / 60Hz YUV 4: 4: 4
Microphone for Camera
MIC-016 [#28088]
Indoor microphone, Camouflaged as Smoke Setector with RCA terminals, Power Input 9-18V DC / 25mA , Frequency Response 200 HZ-10KHz, With proper installation can capture voice from 10 up to 50m2 area, Dimensions Φ: 100mm, H: 50mm
Quad 4: 1 Color
SQC-301 [#23388]
Color Quad, Very Small Dimensions,
4 Inputs Composite, 1 Exit,
Power Supply 12VDC, Resolution 576 Lines
Dimensions 107x53x21 mm
CVBS Signal Line Amplifier
CVA-100 [#31327]
Line amplifier for CVBS signal transmitted via coaxial cable, Adjustable amplification and loss stabilazation (HF GAIN)
Power supply 12 VDC is needed.
HDMI Converter
CVT-583 [#38169]
Converter that receives signal from HDMI ARC and transmits 5.1 analogue audio outputs. Supported multichannel formats Dolby AC-3 & DTS (also 5.1 RAW Streaming)
Stand for Camera with Horizontial and Vertical Movement
TSB-22/TJB-22 [#26152]
Stand for Camera, Plastic, horizontal and vertical movement is controlled via protocol PELCOD (2400 Baud Rate)
White
Maximum Load: 2kgr
Length: 20cm
Video Converter
VDB-201C/PAIR [#31355]
Video Balun,
Video transmission via UTP Cat5
Pillar connector to BNC
Distance: 400-600m
CVBS Video Multiplexer
CSM-40/RF-804V [#31331]
The Multiplexer receives 4 video composite signals and combines them to 1 as the decompiler separates the multiplexed signal to the 4 initial signals.
Ideal for transporting 4 signals via 1 coaxial cable.
Matrix HDMI
CVT-514 [#38171]
Selector-Matrix HDMI with 6 inputs and 2 outputs of which one is ARC. it also has an HDMI audio output with the option the select output will receive signal, analog in Mini Jack and a digital audio output (optical ToSlink).
Cabling for IP Cameras
POE-130/12 [#25760]
Balun Pair 12V
For Power Supply of IP POE Cameras
Through UTP Cat 5
Distance 30m
Power Supply for Cameras
PSU-2281 [#7646]
Power supply for 18 cameras, 220V AC INPUT, 10A, 18CH, 12V DC OUTPUT, Dimensions: 22.5 L x 31.5 H x 5,5 W
Video Converter
VDB-106A/PCS [#12555]
Balun that does not need tools for installation,
Image Transmission up to 330m with a passive receiver,
Image Transmission up to 1500m with active receiver,
8MMZ bandwidth, interference rejection> 60DB.
VGA Splitter
VSP-40 [#8727]
VGA Splitter. 1 VGA input to 4 VGA outputs. Supported Resolutions up to 1600 x 1280. Power supply 9VDV / 500mA. Can Support cable lengths up to 50 meters.
RCA male on a clock
AA-011/RCA01M [#25759]
Adapter
RCA male in a crime.
1 DC Male to 4 Females.
CR-293 [#13114]
DC Splitter from 1 male 5.5 x 2.1mm to 4 females 5.5 x 2.1mm
TSB-30
TSB-30 [#47902]
Metal camera connection mounting box. Ideal for outdoor installations.
VDB-213 / 213A Video Converter
VDB-213+213A [#6052]
RJ-45 to BNC, Active, 1 Video, Distance 400-600m